JAVS Centro accessories high-definition video switching and routing to new and existing Centro systems.

 

JAV-MPA
The JAVS MPA, or Centro Microphone Pre Amplifier Adaptor can be used for adding microphones or low output audio sources to a JAVS P306 audio mixer. This adaptor can be used for conventional micro-phone (balanced or unbalanced). It uses a 3-pin mini XLR, 3 pin block terminal header connector or standard RJ45 connector for the input. The pre-amp does not allow record lighting or push to mute functionality. The amplifier allows for a +10, 20, 30, or 40 dB boost to the incoming audio. If necessary - internal phantom power can be disconnected. Internal circuit provides microphone failure detection signal.

Input
• Standard 3 pin mini XLR-F connector
• 3 positions block terminal header 3.81mm
• RJ45 connector Output

Output:
Standard RJ45 connector, this connection needs to be a pin to pin connection with the mixer. The current ecommendation for this connection is EIA\TIA 568B Standards.


JAV-ATTPRO-RJ45 / JAV-ATTPR-PHX
The Attenuation Adaptor can be used to match the audio levels of different devices to ensure compatibility. It offers fixed attenuation  of 0, -30, -40, -50 dB. JAVS offers 2 versions of the ATT Pro; JAV-ATTPRO-RJ45 is a RJ45 to 3 pin phoenix connector while JAV-ATTPRO-PHX is a phoenix to phoenix connector. Both attenuators have gal-vanically isolated Input /Output.


JM-11 Flex Microphone Combiner
The Centro Microphone expander*/combiner can be used to connect multiple microphones to a single microphone input on the Centro.  This accessory can be used if there is a need for greater number of microphones, or if multiple microphones are used in any one particular area of a room.

*Note: Using the expander limits the functionality of the JAVS FlexMi-crophone.